BENJAMIN MOORE & CO -- 333 REGAL AQUAGLO  -- 8010-00F005767
<pre>=====================  Product Identification  =====================

Product ID:333 REGAL AQUAGLO
MSDS Date:06/25/1990
FSC:8010
NIIN:00F005767
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300
CAGE:09585
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 23.2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC
    OXIDE/METAL OXIDE/YELLOW IRON OXIDE/IRON OXIDE PIGMENT/IRON
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 1%
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5 MG/M3(FE),B2; 9293

Ingred Name:COLUMBIA CARBON, CARBON BLACK, LAMPBLACK (SUSPECTED HUMAN
    CARCINOGEN BY ACGIH), BLACK PEARLS
CAS:1333-86-4
RTECS #:FF5800000
Fraction by Wt: 2.2%
Other REC Limits:3.5 MG/CUM (NIOSH)
OSHA PEL:3.5 MG/CUM
ACGIH TLV:3.5 MG/CUM

Ingred Name:CLAY (KAOLIN)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 12.2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:WEIGHT PER GALLON IN POUNDS: 9.1-10.8
RTECS #:9999999WG

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
    IRRITATION. SKIN/EYES: IRRITATION. INGESTION: LARGE AMOUNTS COULD
    CAUSE SERIOUS INJURY.
Explanation of Carcinogenicity:SEE INGREDIENTS

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER. SKIN:
    WASH W/SOAP & WATER. INGESTION: DRINK 1 OR 2 GLASSES OF WATER TO
    DILUTE. DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL & WATER FOG
Fire Fighting Procedures:COOL EXPOSED CONTAINERS W/WATER. USE
    SELF-CONTAINTED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T THROW OR DROP CONTAINERS. CLOSE
    CONTAINER AFTER EACH USE.
Other Precautions:AVOID CONTACT W/EYES & SKIN OR BREATHING OF SPRAY
    MIST OR SANDING DUST. KEEP OUT OF REACH OF CHILDREN. DON'T TAKE
    INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR FOR PROTECTION
    AGAINST PAINT SPRAY MIST & SANDING DUST IN RESTRICTED OR CONFINED
    AREAS.
Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV & LEL.
    MECHANICAL EXHAUST MAY BE REQUIRED IN CONFINED AREAS.
Protective Gloves:WATERPROOF
Eye Protection:SPLASH GOGGLES OR SAFETY GLASSES
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE & WASH CLOTHING BEFORE REUSE. WASH HANDS
    BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Vapor Density:>1
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:ALL COLORS
Percent Volatiles by Volume:57-70%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:CO2, CO

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL METHODS IN COMPLIANCE WITH LOCAL,
    STATE, AND FEDERAL REGULATIONS. DON'T INCINERATE SEALED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.