SEALED UNIT PARTS CO INC -- SUPCO 88 OIL ADDITIVE  -- 9150-00F051889
<pre>=====================  Product Identification  =====================

Product ID:SUPCO 88 OIL ADDITIVE
MSDS Date:08/15/1995
FSC:9150
NIIN:00F051889
=== Responsible Party ===
Company Name:SEALED UNIT PARTS CO INC
Address:2230 LANDMARK PLACE
Box:21
City:ALLENWOOD
State:NJ
ZIP:08720-5000
Country:US
Info Phone Num:908-223-6844
Emergency Phone Num:908-223-6844
CAGE:28795
=== Contractor Identification ===
Company Name:SEALED UNIT PARTS CO INC
Address:2230 LANDMARK PLACE
Box:21
City:ALLENWOOD
State:NJ
ZIP:08720-5000
Country:US
Phone:908-223-6844
CAGE:28795

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED (C10-C15 SATURATED
    HYDROCARBONS 97%, C10 AROMATICS 3%) (SUSP CARC IARC) * 96-3 *
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 100%
Other REC Limits:200 PPM EXXON

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITANT. SKIN:
    PROLONGED/REPEATED CONTACT CAUSES IRRITATION/DERMATITIS.
    INHALATION: NASAL & RESPIRATORY IRRITANT, CNS EFFECTS & DEATH.
    INGESTION: CAN CAUSE GASTROINTESTINAL IRRITATION. ASPIRATI ON OF
    MATERIAL INTO THE LUNGS CAN CAUSECHEMICAL PNEUMONITIS, WHICH CAN BE
    FATAL.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, DEFATTING, DIZZINESS, WEAKNESS,
    FATIGUE, NAUSEA, HEADACHE, UNCONSCIOUSNESS, VOMITING, DIARRHEA

=======================  First Aid Measures  =======================

First Aid:SKIN/EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. INGESTION:
    DON'T INDUCE VOMITING, KEEP WARM & QUIET. ASPIRATION HAZARD.
    INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR IF NECESSARY. KEEP
    WARM & QUI ET. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:140F
Lower Limits:0.6
Upper Limits:7
Extinguishing Media:REGULAR FOAM/CO2/DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS W/FULL
    FACEPIECE OPERATED IN THE POSITIVE PRESSURE DEMAND MODE. WATER MAY
    BE USED TO KEEP FIRE EXPOSED CONTAINERS COOL.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG THE
    GROUND/BE MOVED BY VENTILATION & IGNITED BY IGNITION SOURCES AT
    LOCATIONS DISTANT FROM MATERIAL HANDLING POINT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL: ABSORB LIQUID ON PAPER, VERMICULITE,
    FLOOR ABSORBENT/OTHER. LARGE: ELIMINATE ALL IGNITION SOURCES.
    EXCLUDE UNPROTECTED PERSONS FROM AREA. STOP LEAK AT SOURCE, DIKE
    AREA, PUMP LIQUID TO SALVAGE  TANK. SHOVEL REMAINING LIQUID INTO
    CONTAINERS.(SUP

======================	Handling and Storage  ======================

Handling and Storage Precautions:ALL 5 GALLON PAILS & LARGE METAL
    CONTAINERS/TANK CARS & TANK TRUCKS SHOULD BE GROUNDED/BONDED WHEN
    MATERIAL IS TRANSFERRED.
Other Precautions:NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM (EVEN
    EMPTY), RESIDUE CAN IGNITE EXPLOSIVELY. SUDDEN RELEASE OF CHEMICAL
    VAPORS/MISTS FROM EQUIPMENT OPERATING AT ELEVATED TEMPS &
    PRESSURE/SUDDEN INGRESS  OF AIR MAY RESULT IN IGNITIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE IS EXCEEDED, A NIOSH/MSHA APPROVED
    AIR SUPPLIED RESPIRATOR IS ADVISED IN ABSENCE OF PROPER
    ENVIROMENTAL CONTROL. OSHA PERMITS NIOSH/MSHA RESPIRATORS (NEGATIVE
    PRESSURE TYPE).
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) TO MAINTAIN
    EXPOSURE <TLVS.
Protective Gloves:RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES/OSHA REGULATED
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE.
Supplemental Safety and Health
SPILL PROC CONT'D: PREVENT RUN-OFF TO SEWERS, STREAMS & OTHER BODIES OF
    WATER. ANY USE OF THIS PRODUCT IN ELEVATED TEMP PROCESSES SHOULD BE
    THOROUGHLY EVALUATED TO ESTABLISH & MAINTAIN SAFE OPERATING 
    CONDITIONS. PREVENT REPEATED/PROLONGED SKIN CONTACT.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:360-465F
Vapor Pres:<1
Vapor Density:>5
Spec Gravity:0.779-0.806
Evaporation Rate &amp; Reference:(N-BUTYL ACETATE=1): <0.1
Appearance and Odor:CLEAR & COLORLESS LIQUID HOMOGENEOUS SOLUTION.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, HYPOCHLORITES, CHLORINE
Stability Condition to Avoid:HEAT, PILOT LIGHTS, FLAMES & OTHER
    IGNITION SOURCES

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.