MINNESOTA MINING & MFG CO -- 3M BRAND FAN-OUT PADDING ADHESIVE -- 8040-00B130011 
=====================  Product Identification  =====================

Product ID:3M BRAND FAN-OUT PADDING ADHESIVE
MSDS Date:10/18/1988
FSC:8040
NIIN:00B130011
=== Responsible Party ===
Company Name:MINNESOTA MINING & MFG CO
Address:3M CTR 224-2S-25
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:76381
=== Contractor Identification ===
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:ADDITIVES (VINYL ACETATE COPOLYMER)
CAS:24937-78-8
Fraction by Wt: 10-20%
Other REC Limits:NONE SPECIFIED

Ingred Name:POLYVINYL ALCOHOL RESIN
CAS:25213-24-5
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED

Ingred Name:SORBITOL
CAS:50-70-4
RTECS #:LZ4290000
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED

Ingred Name:ISOPROPYL ALCOHOL  (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 1-10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192

Ingred Name:METHYL ALCOHOL (METHANOL)  (SARA III)
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 1-3%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S,200PPM/250STEL
ACGIH TLV:S,200PPM/250STEL; 93
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHYL ISOBUTYL KETONE  (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 0.1-1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/75 STEL
ACGIH TLV:50 PPM/75 STEL; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 20-30%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 50-60%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:MAY CAUSE EYE AND SKIN IRRITATION. MAY
    ALSO CAUSE RESPIRATORY SYSTEM IRRITATION, DIGESTIVE SYSTEM
    IRRITATION AND NERVOUS SYSTEM IMPAIRMENT.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 10 MIN.,
    CONTACT A PHYSICIAN. SKIN: WASH AFFECTED AREA WITH SOAP AND WATER.
    INHALATION: MOVE TO FRESH AIR. RESTORE/SUPPORT BREATHING AND SEND
    FOR MED ICAL ASSISTANCE IF NECESSARY. INGESTION: DRINK TWO GLASSES
    OF MILK OR WATER AND CONTACT A PHYSICIAN OR POISON CONTROL CENTER.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:73.0F,22.8C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:OBSERVE ALL PRECAUTIONS. EXTINGUISH ALL
    IGNITION SOURCES. COLLECT SPILLED MATERIAL. CLEANUP RESIDUE AND
    PLACE IN DEPT. OF TRANSPORTATION APPROVED CONTAINER. USE ABSORBENT
    MATERIAL AS NEEDED IN CLEANUP  PROCEDURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
    AREA AWAY FROM SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT
    IN USE. PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:KEEP AWAY FROM FLAME, HEAT, SPARKS AND OTHER SOURCES
    OF IGNITION. USE ONLY IN WELL VENTILATED AREAS. AVOID EYE CONTACT.
    AVOID PROLONGED OR REPEATED SKIN CONTACT. AVOID BREATHING VAPOR.
    KEEP CONTAINER  CLOSED WHEN NOT IN USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
    EXPOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS USUALLY ADEQUATE.
Protective Gloves:RUBBER GLOVES
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
    WORK CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
    EATING OR DRINKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN.

==================  Physical/Chemical Properties  ==================

HCC:F5
Boiling Pt:B.P. Text:180F,82C
Spec Gravity:0.99
pH:5-6.5
Evaporation Rate & Reference:1.0
Solubility in Water:EMULSION
Appearance and Odor:LIGHT BLUE EMULSION; SLIGHT ALCOHOL ODOR
Percent Volatiles by Volume:85%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.