ROBERTSHAW CONTROLS CO -- UNI COOL, 00 222  -- 8030-00N043090
<pre>=====================  Product Identification  =====================

Product ID:UNI COOL, 00 222
MSDS Date:03/28/1989
FSC:8030
NIIN:00N043090
=== Responsible Party ===
Company Name:ROBERTSHAW CONTROLS CO
Address:402 SOUTH TEMEDOAL ST
Box:2000
City:CORONA
State:CA
ZIP:91719
Country:US
Info Phone Num:714-734-2600
Emergency Phone Num:714-734-2600
CAGE:73475
=== Contractor Identification ===
Company Name:ROBERTSHAW CONTROLS CO TENNESSEE DIV
Address:2318 KINGSTON PIKE SW
Box:400
City:KNOXVILLE
State:TN
ZIP:37901-0400
Country:US
Phone:615-546-0550
CAGE:73475
Company Name:UNI-LINE DIV ROBERTSHAW CONTROLS CO
Address:4190 TEMESCAL ST
Box:2000
City:CORONA
State:CA
ZIP:91720
Country:US
Phone:714-734-2600
CAGE:33371

=============  Composition/Information on Ingredients  =============

Ingred Name:ING 7:METALS OR LIVE ELECTRICAL PARTS & TO INSULATE HIMSELF
    FROM WORK & GROUND.
RTECS #:9999999ZZ

Ingred Name:VENT:AREA. TRAIN WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
RTECS #:9999999ZZ

Ingred Name:PROT GLOVES:WELDER'S GLOVES.
RTECS #:9999999ZZ

Ingred Name:EYE PROT:WELDING PROVIDE PROTECTIVE SCREENS & FLASH
    GOGGLES, IF NECESSARY, TO SHIELD OTHERS.
RTECS #:9999999ZZ

Ingred Name:OTHER PROT EQUIP:HEAD, HAND & BODY PROT WHICH HELP TO PVNT
    INJURY FROM RADIA, SPARKS, HEAT & ELEC SHOCK. SEE (ING 13)
RTECS #:9999999ZZ

Ingred Name:ING 12:ANSI Z49.1. AT A MINIMUM MAY INCL ARM PROTECTORS,
    APRONS, HATS, SHOULDER PROT, AS WELL AS DARK SUBSTANTIAL CLTHG.
RTECS #:9999999ZZ

Ingred Name:ALUMINUM OXIDE (2:3) (SARA III)
CAS:1344-28-1
RTECS #:BD1200000
Fraction by Wt: 20-30%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:N/K 

Ingred Name:SILICA, CRYSTALLINE - FUSED; (SILICON DIOXIDE)
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: 20-30%
OSHA PEL:0.1 MG/M3 RDUST
ACGIH TLV:0.1 MG/M3 RDUST

Ingred Name:SILICIC ACID (H*2SIO*3), DISODIUM SALT; (SODIUM SILICATE)
CAS:6834-92-0
RTECS #:VV9275000
Fraction by Wt: 5-10%
OSHA PEL:N/K 
ACGIH TLV:5 MG/M3 (MFR)

Ingred Name:WATER (MFR CAS# 7023-61-2)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: BALANCE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPP DATA:& STIFF JOINTS. ARC RAY CAN INJURE EYES & BURN
    SKIN. ELECTRIC SHOCK CAN KILL.
RTECS #:9999999ZZ

Ingred Name:OTHER PREC:ANS Z49.1 SFTY IN WELDING & CUTTING, PUBLISHED
    BY THE AWS, P.O. BOX 351040, MIAMI, FL 33135 & OSHA (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6:PUB 2206 (29CFR1910), U.S. GOVT PRINTING OFFICE,
    WASHINGTON, D.C. 20402. TRAIN WELDOR NOT TO TOUCH HOT (ING 8)
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:FUMES/GASES GENERATED DURING USE OF
    PROD, IN CONJUNCTION W/HEATING, WELDING, BRAZING OR SOLDERING
    PROCEDURES, CAN BE DANGEROUS TO YOUR HLTH. ACUTE: OVEREXPOS TO
    WELDING FUMES MAY RSLT IN DISCOMFORT SU CH AS DIZZ, NAUS OR
    DRYNESS/IRRIT OF NOSE, THROAT OR EYES. INHAL OF HIGH CONC OF
    MANGANESE, COPPER & (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:SOME OTHER METALS CAUSES AN INFLUENZA-
    LIKE ILLNESS (METAL FUME FEVER). CHRONIC: OVEREXPOS MAY LEAD TO
    SIDEROSIS (IRON DEPOSITS IN LUNGS) & IS BELIEVED BY SOME
    INVESTIGATORS TO AFFECT PULM FU NCTION. LONG TERM INHAL OF LEAD
    FUMES OR INGEST MAY LEAD TO LEAD POISONING W/SYMPS SUCH AS METALLIC
    TASTE, (SUP DAT)
Medical Cond Aggravated by Exposure:AGGRAVATION OF PRE-EXISTING
    RESPIRATORY OR ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.

=======================  First Aid Measures  =======================

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID TECHNIQUES RECOMMENDED
    BY THE AMERICAN RED CROSS. INHAL:REMOVE FROM EXPOSURE TO FRESH AIR.
    SKIN:WASH AFFECTED AREAS W/SOAP & WATER. EYES:FLUSH W/WATER FOR AT
    LEA ST 15 MINS. SEEK MEDICAL AID. INGEST:DONOT INDUCE VOMITING.
    SEEK MEDICAL ADVICE.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Extinguishing Media:NON-FLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
    FIRE CONDITIONS .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FUEL GAS TORCHES & SOLDERING IRONS USED
    FOR WELDING, BRAZING & SOLDERING OPERATIONS CAN IGNITE
    COMBUSTIBLES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:COLLECT SPILLED MATERIAL W/A SPATULA TYPE
    INSTRUMENT FOR RECLAMATION OR DISPOSAL IN SEALED CONTAINERS. KEEP
    AIRBORNE DUST AT A MINIMUM WHEN CLEANING UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTR IN COOL,
    DRY PLACE, AVOIDING CONT W/EXTREME HEAT TO MAINTAIN PROD QUALITY.
    AVOID CONT W/ EYES, SKIN OR CLOTHING.
Other Precautions:USE GOOD HOUSEKEEPING PRACTICES TO PVNT ACCUM OF
    DUST/ FUMES. DO NOT SMOKE, EAT OR DRINK IN WORK AREA. READ &
    UNDERSTAND MFRS INSTRUCTIONS & PRECAUTIONARY LBL ON PROD. FOR INFO
    RELATING TO HEATING, WE LDING & BRAZING OPERATIONS, SEE (ING 6)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR OR AIR
    SUPPLIED RESPIRATOR WHEN USING PRODUCT IN CONFINED SPACE OR WHEN
    WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR WHERE LOCAL
    EXHAUST OR VENTILATION DOES NO T KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT WORK AREA, OR BOTH, TO KEEP
    FUMES/GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & GEN (ING 9)
Protective Gloves:CHEM RESIST GLOVES, IF WELDING (ING 10)
Eye Protection:ANSI APPRVD CHEM SFTY GOGGS.(ING11
Other Protective Equipment:SFTY EYEWASH STATION, CHEM RESIST APRON.
    WHEN USING PROD IN CONJUNCTION W/WELDING/BRAZING OPERATIONS, WEAR
    (ING 12)
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
HAZ DECOMP PROD:PROCEDURES, COATINGS, ETC. PROD MAY FORM SOME
    CRYSTOBALITE @ >1600F FOR EXTENDED PERIODS. EFTS OF OVEREXP:ABDOM
    PAIN, NAUS, JOINT OR MUSCLE PAIN OR WEAK, POSS WT LOSS, MENTAL
    CONFUSN,  ANEMIA & A "LEAD LINE" ON GUMS. CHRONICHLTH HAZARDS ASSOC
    W/FLUXES MAY INCL DERM, WT LOSS, BRITTLE BONES, WEAK (ING 5)

==================  Physical/Chemical Properties  ==================

HCC:N1
Spec Gravity:2.65 (H2O=1)
Appearance and Odor:LIGHT BLUE TACKY FIBER PASTE; SLIGHT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MATERIAL MAY BE INCOMPATIBLE W/HYDROFLUORIC ACID & CONCENTRATED ALKALI.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE UNDER NORM CNDTN. WELDING FUMES
    CANNOT BE CLASSIFIED SIMPLY. COMPOSITION DEPENDS ON METAL WELDED,
    (SUPP DATA)

====================  Disposal Considerations  ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
    ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
    LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
    W/FEDERAL, STATE & LOC AL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.