BRULIN & CO INC -- BRULINSOLV 140  -- 6850-00N041955
<pre>=====================  Product Identification  =====================

Product ID:BRULINSOLV 140
MSDS Date:01/01/1990
FSC:6850
NIIN:00N041955
=== Responsible Party ===
Company Name:BRULIN & CO INC
Box:270
City:INDIANAPOLIS
State:IN
ZIP:46206-0270
Country:US
Info Phone Num:317-923-3211
Emergency Phone Num:317-923-3233;800-424-9300(CHEMTREC)
CAGE:IO291
=== Contractor Identification ===
Company Name:BRULIN & CO INC
Box:270-B
City:INDIANAPOLIS
State:IN
ZIP:46206-0270
Country:US
Phone:317-923-3211;800-428-7149
CAGE:IO291
Company Name:BRULIN AND CO INC
Address:2920 DR ANDREW J BROWN AVE
Box:270
City:INDIANAPOLIS
State:IN
ZIP:46205-0270
Country:US
Phone:317-923-3211
CAGE:94058

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; (HYDROTREATED LIGHT
    PETROLEUM DISTILLATE)
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 90-100%
Other REC Limits:200 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIRECT EYE CONTACT MAY CAUSE
    IRRITATION. PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
    IRRITATION. HIGH VAPOR CONCENTRATIONS ARE IRRITATING TO EYES &
    RESPIRATORY TRACT & MAY PRODUCE CENTRAL NERV OUS SYSTEM EFFECTS.
    THIS PRODUCT HAS A LOW ORDER OF ACUTE ORAL TOXICITY, BUT MINUTE
    AMOUNTS ASPIRATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:INTO THE LUNGS DURING INGESTION MAY
    CAUSE MILD TO SEVERE PULMONARY INJURY & POSSIBLE DEATH. CHRONIC:
    CHRONC SKIN EXPOSURE MAY CAUSE DEFATTING OF THE SKIN & LEAD TO
    DERMATITIS. SIGNS & SYMPTOM S OF EXPOSURE: EYE & SKIN IRRITATION
    SEEN AS REDNESS. EXCESSIVE INHALATION MAY CAUSE HEADACHE, DIZZINESS
    & NUMBNESS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS
    DIFFICULT. EYES:FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
    MINS, LIFTING UPPER & LOWER LIDS OCCASIONALLY. GET MEDICAL
    ATTENTION. SKIN:W ASH W/MILD SOAP & WATER. REMOVE CONTAMINATED
    CLOTHING & LAUNDER BEFORE REUSE. INGEST:DO NOT INDUCE VOMITING.
    KEEP WARM, QUIET & GET IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:140F,60C
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:FOAM, CARBON DIOXIDE OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
    . WATER FOG MAY BE USED TO COOL CLSD CONTRS. AVOID SPREADING
    BURNING LIQ W/WATER USED FOR COOLING PURPOSES.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
    NEAR DRUM, EVEN EMPTY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE THE
    AREA WELL. ABSORB ON SOLID ABSORBENT & SHOVEL INTO CONTAINERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BETWEEN 0F & 120F. AVOID
    INHALATION OF VAPORS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF TLV IS EXCEEDED, USE NIOSH/MSHA APPROVED
    RESPIRATOR. CONSULT YOUR SAFETY EQUIPMENT SUPPLIER FOR
    RECOMMENDATIONS.
Ventilation:MECHANICAL (GENERAL) SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE BATHS & SAFETY SHOWERS MEETING ANSI
    DESIGN CRITERIA IN WORK AREAS RECOMMENDED IF SPLASHING IS LIKELY TO
    OCCUR.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>360F,>182C
Melt/Freeze Pt:M.P/F.P Text:<0F,<-18C
Vapor Pres:30 @ 77F
Vapor Density:5
Spec Gravity:0.79 (H*2O=1)
Evaporation Rate &amp; Reference:0.05 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID; CHARACTERISTIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS OR BASES & SELECTED AMINES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION IN THE PRESENCE
    OF AIR MAY YIELD CARBON MONOXIDE & CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE ACCORDING TO FEDERAL, STATE & LOCAL LAWS
    & 40 CFR.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.