SYNKOLOID INC -- 120 EXT SPACK PASTE  -- 5610-00N027819
<pre>=====================  Product Identification  =====================

Product ID:120 EXT SPACK PASTE
MSDS Date:07/25/1991
FSC:5610
NIIN:00N027819
=== Responsible Party ===
Company Name:SYNKOLOID INC
Address:148 EAST 5TH ST
City:BAYONNE
State:NJ
ZIP:07002
Country:US
Info Phone Num:201-437-0770
Emergency Phone Num:201-437-0770
CAGE:IO233
=== Contractor Identification ===
Company Name:SYNKOLOID INC
Address:148 EAST 5TH ST
Box:City:BAYONNE
State:NJ
ZIP:07002
Country:US
Phone:201-437-0770
CAGE:IO233

=============  Composition/Information on Ingredients  =============

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:ALKYD RESIN
CAS:68459-38-4
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:STODDARD SOLVENT; (MINERAL SPIRITS)
CAS:8052-41-3
RTECS #:WJ8925000
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:XYLENE (SARA 313) (CERCLA)
CAS:1330-20-7
RTECS #:ZE2100000
OSHA PEL:100 PPM
ACGIH TLV:100 PPM/150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION OF HIGH
    CONCENTRATIONS OF MINERAL SPIRITS MAY HAVE RESULTS RANGING FROM
    MILD DEPRESSION TO CONVULSIONS AND LOSS OF CONSCIOUSNESS. CHRONIC:
    NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WITH COOL WATER FOR AT LEAST 15 MINUTES. IF
    IRRITATION PERSISTS, CONSULT MD. INGESTION: DO NOT INDUCE VOMITING.
    CONSULT MD. INHALATION: IF OVERCOME BY VAPORS, REMOVE FROM EXPOSURE
    AND CONS ULT MD. SKIN: WASH WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, CARBON DIOXIDE, WATER/FOG, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL CONTAINERS WITH WATER TO AVOID PRESSURE BUILD-UP.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. ABSORB WITH
    ABSORBENT, SWEEP OR SCOOP UP, VENTILATE EXPOSED ENCLOSED AREAS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM HEAT AND OPEN FLAME. USE
    WITH ADEQUATE VENTILATION TO KEEP AIR CONTAMINANT LEVEL BELOW
    EXPOSURE LIMITS.
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF VAPORS OR
    SKIN CONTACT. USE NIOSH APPROVED AIR-SUPPLIED RESCUE EQUIPMENT IN
    ENCLOSED AREAS. COOL EXPOSED CONTAINERS WITH WATER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID BREATHING VAPORS. USE ONLY WITH ADEQUATE
    VENTILATION. USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
    OF CONCERN .
Ventilation:OPEN WINDOW, OR FAN TO REMOVE SOLVENT VAPORS FROM LOW
    AREAS.
Protective Gloves:HYDROCARBON INSOLUBLE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EMERGENCY EYEWASH AND DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA . WEAR FULL-LENGTH CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Density:HVR/AIR
Spec Gravity:1.62 
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HIGH TEMPERATURE OR FLAME.
Hazardous Decomposition Products:OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. REFER TO HAZARD CAUTION INFORMATION IN OTHER
    SECTIONS OF THIS MSDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.