SPRAYON PRODUCTS -- RTV SILICONE GASKET MAKER, 765-1483 -- 8030-00N054126
=====================  Product Identification  =====================

Product ID:RTV SILICONE GASKET MAKER, 765-1483
MSDS Date:01/21/1994
FSC:8030
NIIN:00N054126
=== Responsible Party ===
Company Name:SPRAYON PRODUCTS
Address:26300 FARGO AVE
City:BEDFORD AVE
State:OH
ZIP:44146
Country:US
Info Phone Num:216-292-7400
Emergency Phone Num:216-292-7400;800-424-9300(CHEMTREC)
CAGE:09800
=== Contractor Identification ===
Company Name:SHERWIN-WILLIAMS DIVERSIFIED BRANDS, INC.
Address:26300 FARGO AVENUE
Box:City:BEDFORD HEIGHTS
State:OH
ZIP:44146
Country:US
Phone:216-292-7400 OR 216-595-8634
CAGE:09800

=============  Composition/Information on Ingredients  =============

Ingred Name:ACETIC ACID  (SARA III)
CAS:64-19-7
RTECS #:AF1225000
OSHA PEL:10 PPM
ACGIH TLV:10 PPM/15 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:SILICA AMORPHOUS, HYDRATED
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:NITROGEN (PROPELLANT)
CAS:7727-37-9
RTECS #:QW9700000
OSHA PEL:N/K 
ACGIH TLV:ASPHYXIANT

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:MAY IRRITATE UPPER
    RESPIRATORY SYSTEM. IN A CONFINED AREA, HIGH CONC MAY CAUSE NAUSEA,
    HEADACHE OR DIZZINESS. SKIN:MAY CAUSE REDNESS, ITCHING &
    IRRITATION. INGEST:MAY CAUSE NAUSEA. EYES:MA Y CAUSE BURNING
    SENSATION & IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

=======================  First Aid Measures  =======================

First Aid:INHAL:IF AFFECTED, REMOVE PERSON FROM EXPOSURE. RESTORE
    NORMAL BREATHING. KEEP PERSON WARM & QUIET. IF SYMPTOMS PERSIST,
    CALL PHYSICIAN. SKIN:REMOVE CONTAMINATED CLOTHING. (LAUNDER BEFORE
    RE-USE). WAS H SKIN WITH SOAP & WATER. EYES:FLUSH WITH LARGE VOLUME
    OF WATER FOR @ LEAST 15 MINUTES. GET MEDICAL ATTENTION. INGEST:DO
    NOT INDUCE VOMITING. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>200F,>93C
Lower Limits:5.4%
Upper Limits:19.3%
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST AT HIGH
    TEMPERATURES SUCH AS IS FOUND IN A "FIRE" SITUATION. HAZ PRODS
    FORMED BY FIRE/THERM DECOMP:CO, CO*2.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PICK UP WITH AN INERT ABSORBENT AND PUT IN
    CLOSED METAL CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F, IN DIRECT
    SUNLIGHT, OR EXPOSE CANS TO HEAT SOURCES WHICH COULD CAUSE THE CANS
    TO BURST.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NORMALLY. IF EXPOSURE LIMITS ARE EXCEEDED,
    WEAR NIOSH/MSHA PROPERLY FITTED ORGANIC VAPOR/PARTICULATE
    RESPIRATOR.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:FOR EXTENDED PERIODS OF USE, WEAR CHEMICAL
    RESISTANT GLOVES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>244F,>118C
Vapor Density:>1
Spec Gravity:1.00 (H*20=1)
Evaporation Rate & Reference:>1 (BUTYL ACETATE =1)
Solubility in Water:NIL
Appearance and Odor:BLUE, CLEAR, RED & BLACK SLIGHT ODOR
Percent Volatiles by Volume:4

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NOT KNOWN.
Stability Condition to Avoid:NOT KNOWN.
Hazardous Decomposition Products:NOT KNOWN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH ALL APPLICABLE FEDERAL, STATE
    AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.