HONEYWELL INC -- HEAT CONDUCTIVE COMPOUND, 120650 -- 8030-00N020771
===================== Product Identification ===================== Product ID:HEAT CONDUCTIVE COMPOUND, 120650 MSDS Date:03/25/1988 FSC:8030 NIIN:00N020771 === Responsible Party === Company Name:HONEYWELL INC Address:1500 W DUNDEE RD City:ARLINGTON HEIGHTS State:IL ZIP:60004 Country:US Info Phone Num:312-394-4000 Emergency Phone Num:312-394-4000 Preparer's Name:CHUCK HOFFMAN CAGE:1D914 === Contractor Identification === Company Name:HONEYWELL INC Address:1500 W DUNDEE RD Box:City:ARLINGTON HEIGHTS State:IL ZIP:60004 Country:US Phone:312-394-4000 CAGE:1D914 ============= Composition/Information on Ingredients ============= Ingred Name:ALUMINUM (SARA III) CAS:7429-90-5 RTECS #:BD0330000 Fraction by Wt: 30% OSHA PEL:15MG/M3 DUST/5 FUME ACGIH TLV:10MG/M3 DUST; 9192 Ingred Name:BENTONITE (GREASE); (MFR SPELLING:BEDTONITE) CAS:1302-78-9 RTECS #:CT9450000 Fraction by Wt: 70% ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:PROLONGED CONTACT MAY CAUSE SKIN, EYE AND MUCOUS MEMBRANE IRRITATION. THIS PRODUCT IS AN INERT, NON-TOXIC GREASE. SKIN IRRITATION HAS NEVER BEEN EXPERIENCED IN OVER 11 YEARS OF PRODUCTION AND PACKAGIN G. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MD ATTENTION. SKIN:RINSE WITH PETROLEUM PRODUCT. WASH WITH SOAP AND WATER. INHAL:NONE. INGEST:OBTAIN MEDICAL ATTENTION. ===================== Fire Fighting Measures ===================== Flash Point Method:COC Flash Point:FLUID ONLY 450F Extinguishing Media:CO2, DRY CHEMICAL OR FOAM. Fire Fighting Procedures:DO NOT BREATHE FUMES. USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . ================== Accidental Release Measures ================== Spill Release Procedures:WIPE UP SPILLS. PLACE WIPE UP IN CONTAINER FOR DISPOSAL. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE NEAR OPEN FLAME OR HEAT. AVOID PROLONGED SKIN CONTACT. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NONE REQUIRED. Ventilation:NO SPECIAL VENTILATION REQUIRED. Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:PROTECTIVE CLOTHING IS ADVISABLE BECAUSE MATERIAL IS DIFFICULT TO REMOVE FROM SKIN AND CLOTHING. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Solubility in Water:NEGLIGIBLE Appearance and Odor:ALUMINUM COLOR, PLEASANT ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS AND HALOGENS. Stability Condition to Avoid:OPEN FLAME AND HIGH HEAT. Hazardous Decomposition Products:CO, CO2. ==================== Disposal Considerations ==================== Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS IN ANY WASTE DISPOSAL ACTION. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.