BENJAMIN MOORE & CO -- IRONCLAD EPOXY HARDENER, 177 -- 8010-00N022731 
=====================  Product Identification  =====================

Product ID:IRONCLAD EPOXY HARDENER, 177
MSDS Date:06/25/1990
FSC:8010
NIIN:00N022731
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:11950
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:11950

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHANOL,2-PROPOXY-; (2-PROPOXYETHANOL (F3)). VP: 1.3@25C.
CAS:2807-30-9
RTECS #:KM2800000
Fraction by Wt: 45.2%
OSHA PEL:25 PPM (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL: HARMFUL IF INHALED. MAY
    AFFECT BRAIN/NERVOUS SYTEM, CAUSING DIZZINESS, HEADACHE, OR NAUSEA.
    CONTACT MAY BE HARMFUL IF ABSORBED THRU SKIN. INGEST: IRRITATION OF
    DIGESTIVE TRACT & NERVOUS S YSTEM DEPRESSION (DROW/DIZZ/LOSS OF
    COORDINATION & FATIGUE). ASPIRATION HAZARD-MATL CAN ENTER LUNGS
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:DURING SWALLOW/VOMIT & CAUSE LUNG
    INFLAMMATION & DAM. CHRONIC:SKIN:PRLNG/RPTD EXPOS MAY CAUSE DERMAT.
    NOTICE:RPTS HAVE ASSOC PERM BRAIN & NERV SYS DAM W/RPTD/PRLNG
    OVEREXP TO SOLV AMONG PERSO NS ENGAGED IN PAINTING TRADE.
    INTENTIONAL MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE HARMFUL
    OR FATAL.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN
    ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM HAZARD AREA, MAINTAIN BREATHING, CALL
    PHYS. SKIN: REMOVE WITH SOAP AND WATER. EYE: FLUSH IMMED WITH LARGE
    AMOUNTS OF WATER FOR AT LEAST 15 MIN. CALL PHYS. INGEST: DRINK 1 OR
    2 GLASS ES OF WATER TO DILUTE. DO NOT INDUCE VOMIT. CALL PHYS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:129F,54C
Lower Limits:1.3%
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . DO NOT USE WATER STREAM ON BURNING LIQUID.
    COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
    BREATHING VAPORS. USE NON-SPARKING TOOLS TO RETURN MATERIALS TO
    CONTAINER. ABSORB RESIDUE WITH FULLER'S EARTH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:COMBUSTIBLE-KEEP AWAY FROM HEAT AND
    FLAME.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. AVOID PROLONGED
    CONTACT WITH SKIN AND BREATHING OF VAPOR SPRAY MIST OR SANDING
    DUST. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF
    CHILDREN. DO NOT TAKE INTE RNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIFED
    FOR PROTECTION AGAINST PAINT SPRAY MIST, SANDING DUST AND ORGANIC
    VAPORS IN RESTRICTED OR CONFINED AREAS.
Ventilation:ADEQ TO MAINTAIN WORK ATM BELOW TLV & LEL. MECH EXHAUST MAY
    BE REQ IN CONFINED AREAS. DISCHARGE EXHAUST ONLY IN (SUPDAT)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH
    HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health
VENT: AREA AWAY FROM IGNITION SOURCES.

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:>301F,149C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:52.2

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES AND BUILD UP VAPORS.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH
    LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.