3M CENTER -- SCOTCH SPRAY MOUNT ARTIST'S ADHESIVE  -- 8040-00-171-1535
<pre>=====================  Product Identification  =====================

Product ID:SCOTCH SPRAY MOUNT ARTIST'S ADHESIVE
MSDS Date:01/01/1987
FSC:8040
NIIN:00-171-1535
=== Responsible Party ===
Company Name:3M CENTER/ST. PAUL, MN 55144
Emergency Phone Num:(612) 733-1110
CAGE:76381
=== Contractor Identification ===
Company Name:3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
Address:3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:800-364-3577/651-737-6501(24 HOURS)
CAGE:04963
Company Name:MINNESOTA MINING AND  MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381

=============  Composition/Information on Ingredients  =============

Ingred Name:ACRYLIC RESIN (SEE SUPPLEMENTAL FOR INGREDIENTS)
Fraction by Wt: <8%

Ingred Name:TERPENE RESIN BLEND
Fraction by Wt: <8%

Ingred Name:ISOBUTANE
CAS:75-28-5
RTECS #:TZ4300000
Fraction by Wt: 37.0%

Ingred Name:METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE)  (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 55.0%
OSHA PEL:350 PPM/450 STEL
ACGIH TLV:350 PPM/450STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Ingred Name:1,4-DIOXANE (DIETHYLENE DIOXIDE)  (SARA III)
CAS:123-91-1
RTECS #:JG8225000
OSHA PEL:S, 100 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

Effects of
    Overexposure:DIZZINESS/NAUSEA/HEADACHE/UNCONSCIOUSNESS/DEATH.
    EYE/SKIN CONTACT: MAY CAUSE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH
    SOAP/WATER. INHALATION: MOVE VICTIM TO FRESH AIR. RESTORE OR
    SUPPORT BREATHING AS NECESSARY. IF SWALLOWED: DON'T INDUCE
    VOMITING. DRINK 2 GL ASSES MILK OR WATER. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:-50F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:SCBA WHEN FIGHTING FIRES INVOLVING THIS
    MATERIAL.
Unusual Fire/Explosion Hazard:FLAMMABLE. OVERHEATED, CLOSED CONTAINERS
    ADJACENT TO FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP.

==================  Accidental Release Measures  ==================

Spill Release Procedures:IF ANY CANS RUPTURE, EXTINGUISH ALL IGNITION
    SOURCES/VENTILATE THE AREA. USE ABSORBE MATERIAL AS NEEDED IN
    CLEANUP PROCEDURE. PLACE CAN IN AN APPROVED U.S. PT. OF
    TRANSPORTATION CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED BREATHING OF VAPORS
    AND OVERSPRAY DURING APPLICATION. AVOID CONTACT WITH EYE/SN.
Other Precautions:AVOID VAPOR CONTACT W/OPEN FLAMES, WELDING ARCS OR
    HIGH TEMP SOURCES WHICH MIGHT CAUSE VAPOR DECOMPOSITION TO PRODUCE
    HARMFUGASES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE ONLY IN AREAS ADEQUATELY VENTILATED
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV/LEL
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS DATE: 16 DEC 1985. ALSO CONTAINS: PLASTICIZER (1000264PL) <8.0%.

==================  Physical/Chemical Properties  ==================

Vapor Density:4.6
Evaporation Rate &amp; Reference:(ETHER = 1): .4
Solubility in Water:NIL
Appearance and Odor:TRANSLUCENT LIQUID: SWEET ODOR.
Percent Volatiles by Volume:92%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
DON'T PUNCTURE OR INCINERATE
Stability Condition to Avoid:DON'T STORE AT TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:HCL/CHLORINE/PHOSGENE WHEN SUBJECTED
    TO EXCESS. HEAT/FLAME

====================  Disposal Considerations  ====================

Waste Disposal Methods:DON'T PUNCTURE IN INCINERATE CAN IN HOUSEHOLD
    INCINERATOR. INCINERATE PROPERLY IN ACCORDANCE W/APPLICABLE
    REGULATIONS AS THE PRODUCT CONTAINS HALOGENS. EMPTY CONTAINERS MAY
    BE DISPOSED IN A SANITARY L ANDFILL IN ACCORDANCE W/LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.