FIBREGLASS EVERCOAT CO INC -- FORMULA 27, 572 -- 8030-00N026827 
=====================  Product Identification  =====================

Product ID:FORMULA 27, 572
MSDS Date:03/22/1993
FSC:8030
NIIN:00N026827
=== Responsible Party ===
Company Name:FIBREGLASS EVERCOAT CO INC
Address:8800 CORNELL RD
City:CINCINNATI
State:OH
ZIP:45242
Country:US
Info Phone Num:800-729-7600
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:FIBRE
=== Contractor Identification ===
Company Name:FIBRE GLASS-EVERCOAT CO INC
Address:6600 CORNELL ROAD
Box:City:CINCINNATI
State:OH
ZIP:45242
Country:US
Phone:513-489-7600
CAGE:18731
Company Name:FIBREGLASS EVERCOAT CO INC
Address:6600 CORNELL RD
City:CINCINNATI
State:OH
ZIP:45242-5000
Country:US
Phone:800-729-7600
CAGE:FIBRE

=============  Composition/Information on Ingredients  =============

Ingred Name:STYRENE  (SARA 313). VP:4.5.
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 10-15%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM;100 STEL, S
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC
    (NON-ASBESTOS TYPE))
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 25-30%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
Fraction by Wt: 25-30%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5-10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CONTACT W/LIQUID OR VAPOR
    MAY RESULT IN IRRITATION, REDNESS, TEARING & BLURRED VISION.
    SKIN:CONTACT W/WET MATERIAL MAY RESULT IN IRRITATION, DERMATITIS &
    POSSIBLE DEFATTING. INHALATION:EXCE SSIVE INHALATION OF VAPORS MAY
    CAUSE NASAL & RESPIRATORY IRRITATION, ACUTE NERVOUS SYSTEM
    DEPRESSION, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE:IARC MONOGRAPHS, SUPPLEMENT, VOL
    7, PG 345, 1987:GROUP 2B. ANIMAL:NERVOUS SYSTEM.
Effects of Overexposure:HLTH HAZ:FATG, WEAK, NAUS, HDCH & DIZZ.
    INGEST:INGEST OF THIS MATL MAY CAUSE GI IRRIT, NAUS, DIARR & VOMIT.
    ASPIR OF MATL INTO LUNGS DUE TO VOMIT MAY PRDCE CHEM PNEUM WHICH
    CAN BE FATAL. CHRONIC:EXCES SIVE OVEREXP TO STYRENE HAS BEEN FOUND
    TO CAUSE FOLLOWING EFTS IN LAB ANIMALS:LIVER ABNORMS, KIDNEY DMG &
    LUNG DMG.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMED W/LG AMTS OF WATER FOR AT LST 15 MINS. SEE
    MD FOR MED TREATMENT. SKIN:IMMED WASH AFFECTED AREA W/SOAP & WATER.
    REMOVE CONTAM CLTHG. CONSULT MD IF IRRIT DEVELOPS. INHAL:REMOVE
    PERS TO  FRESH AIR. RESTORE BRTHG. KEEP PERS WARM & QUIET. TREAT
    SYMPTOMATICALLY. GET MED ATTN. INGEST:DRINK 1-2 GLASSES OF WATER TO
    DILUTE. KEEP PERS WARM & QUIET. CONSULT MD/POIS CTL CTR IMMED.

=====================  Fire Fighting Measures  =====================

Flash Point:88.0F,31.1C
Lower Limits:1.1%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . WATER MAY BE USED TO COOL CONTAINERS TO PREVENT
    PRESSURE BUILD-UP WHICH MAY RUPTURE CONTAINERS.
Unusual Fire/Explosion Hazard:FLAMM LIQ - CLASS 1C. VAPS ARE HVR/AIR &
    MAY TRAVEL ALONG FLOOR & BE IGNITED BY SPKS/FLAMES AT DIST FROM
    WHERE MATL IS BEING USED. POLYMERIZATION OF (SUPP DATA)

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
    AREA. WEAR PROTECTIVE EQUIPMENT. AVOID BREATHING VAPORS. CONTAIN
    SPILL, ABSORB EXCESS W/DRY INERT MATERIAL, REMOVE & DISPOSE OF
    PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE MATL IN COOL, WELL-VENTILATED
    AREA. DO NOT STORE AT TEMPS >75F. DO NOT USE/STORE NEAR HEAT,
    SPKS/OPEN FLAME. KEEP CNTNRS TIGHTLY CLOSED.
Other Precautions:THIS MATL MUST BE CATALYZED PRIOR TO USE. WET MATL
    WILL HAVE HAZARD PROPERTIES OF BOTH COMPONENTS. PLEASE REFER TO
    MSDS FOR CATALYST. IF PROD IS TO BE SANDED, PEL/TLV OF 10 MG/M3 FOR
    NUISANCE DUSTS SH OULD BE OBSERVED. KEEP OUT OF (SUPDAT)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS DESIGNED TO
    REMOVE PARTICULATE MATTER & ORGANIC SOLVENT VAPORS.
Ventilation:GEN DILUTION/LOC EXHST VENT SHOULD BE PROVIDED TO KEEP
    EXPOS BELOW ACCEPT LIMS & TO KEEP SOLV VAPS BELOW LEL.
Protective Gloves:NEOPRENE OR NATURAL RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . IMPERMEABLE CLTHG SHOULD BE WORN TO (SUPDAT)
Work Hygienic Practices:ALWAYS WASH HANDS AFTER USING THIS MATERIAL &
    BEFORE EATING, DRINKING OR SMOKING.
Supplemental Safety and Health
EXPLO HAZ:MATL MAY OCCUR UNDER FIRE CNDTNS. POLYMERIZATION OF MATL IN
    CLSD CNTNR CAN CREATE PRESS BUILD-UP WHICH MAY CAUSE RUPTURE OF
    CNTNR. HAZ DECOMP PROD:VARIOUS HYDROCARBONS. OTHER PREC:REACH OF C
    HILDREN. DO NOT TAKE INTERNALLY. AVOID CONT W/EYES & SKIN. OTHER
    PROT EQUIP:PVNT PRLNG/RPTD CONT OF WET MATL W/SKIN.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:293F,145C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.84 
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
PEROXIDES, STRONG OXIDIZERS, STRONG MINERAL ACIDS, STRONG BASES &
    POLYMERIZATION CATALYSTS.
Stability Condition to Avoid:HIGH TEMPERATURES, IGNITION SOURCES &
    CONTACT W/INCOMPATIBLE MATERIALS.
Hazardous Decomposition Products:HAZ FUMES MAY BE PRDCD WHEN MATL IS
    HEATED TO DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE
    & (SUPP DATA)
Conditions to Avoid Polymerization:HIGH TEMPERATURES, IGNITION SOURCES
    & CONTACT W/INCOMPATIBLEE MATERIALS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS. BEFORE ATTEMPTING TO CLEAN-UP OR DISPOSING OF
    MATERIAL, REFER TO HAZARD INFORMATION IN OTHER SECTIONS OF THIS
    MSDS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.