TAYLOR TECHNOLOGIES INC -- PERMANGANATE REAGENT, R-0730  -- 6810-00N052126
<pre>=====================  Product Identification  =====================

Product ID:PERMANGANATE REAGENT, R-0730
MSDS Date:01/26/1994
FSC:6810
NIIN:00N052126
=== Responsible Party ===
Company Name:TAYLOR TECHNOLOGIES INC
Address:31 LOVETON AVE
City:SPARKS
State:MD
ZIP:21152
Country:US
Info Phone Num:301-472-4340
Emergency Phone Num:301-472-4340
CAGE:EO526
=== Contractor Identification ===
Company Name:TAYLOR TECHNOLOGIES INC
Address:31 LOVETON CIRCLE
City:SPARKS
State:MD
ZIP:21152-9201
Country:US
Phone:410-472-4340
CAGE:EO526
Company Name:TAYLOR TECHNOLOGIES,  INC
Address:31 LOVETON CIRCLE
Box:City:SPARKS
State:MD
ZIP:21152
Phone:401-472-4340
CAGE:89975

=============  Composition/Information on Ingredients  =============

Ingred Name:PERMANGANIC ACID, POTASSIUM SALT; (AQUEOUS SOLUTION OF
    POTASSIUM PERMANGANATE)  (SARA III)
CAS:7722-64-7
RTECS #:SD6475000
Fraction by Wt: 5%
OSHA PEL:5 MG/M3, C
ACGIH TLV:5 MG/M3
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50: (ORAL, RAT) 1090 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CONTACT WITH SKIN CAUSES STAINING AND
    CAN CAUSE IRRITATION. CONTACT WITH EYES CAUSES IRRITATION.
    INGESTION CAN CAUSE IRRITATION TO THE GI TRACT, NAUSEA, VOMITING
    AND DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
    OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: WASH THOROUGHLY WITH SOAP &
    WATER. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION. EYES: FLUSH
    WELL FOR  AT LEAST 15 MINUTES WITH WATER & GET MEDICAL ATTENTION.
    INGEST: CONTACT MD IMMEDIATELY & GIVE LARGE AMOUNTS OF WATER.
    INDUCE VOMITING UNDER DIRECTION OF MD.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THE DRY SALT IS A STRONG OXIDIZING
    REAGENT AND CAN CAUSE IGNITION ON CONTACT WITH ORGANICS AND READILY
    OXIDIZABLE MATERIALS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH VERMICULITE OR OTHER INERT
    MATERIAL AND CONTAINERIZE FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID POSSIBILITY OF EVAPORATION OR
    CONTACT WITH COMBUSTIBLES OR REDUCING AGENTS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:GENERAL PURPOSE GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:NONE LISTED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: REACT W/SOME MATLS SUCH AS GLYCERIN & OTHER ORGANICS
    TO PRODUCE COMBUSTION.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17
Vapor Density:0.6
Spec Gravity:1
pH:8.7
Solubility in Water:COMPLETE
Appearance and Odor:DARK PURPLE SOLUTION.
Percent Volatiles by Volume:95

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ACIDS, REDUCING AGENTS, ORGANICS AND COMBUSTIBLE
    MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THIS MATL IS STRONG OXIDIZING AGENT.
    CAN REACT EXPLO W/SULFURIC ACID & HYDROGEN PEROXIDE. THE DRIED
    RESIDUE CAN (SUPDAT)

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF BY INCINERATION OR OTHER METHOD
    APPROVED OF BY LOCAL, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.