BENJAMIN MOORE & CO -- STAYS CLEAR ACRYLIC POLYURETHANE, 422  -- 8010-00N055960
<pre>=====================  Product Identification  =====================

Product ID:STAYS CLEAR ACRYLIC POLYURETHANE, 422
MSDS Date:04/19/1993
FSC:8010
NIIN:00N055960
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Info Phone Num:201-573-9600
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:09585
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Ingred Name:DIPROPYLENE GLYCOL METHYL ETHER. VP:0.55 @ 20C.
CAS:20324-32-7
Fraction by Wt: 2.8%
OSHA PEL:100 MG/M3 (MFR)
ACGIH TLV:100 MG/M3 (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:CAUSES NOSE & THROAT
    IRRIT. EYE/SKIN CONTACT:CAUSES IRRITATION. INGEST:INGESTION OF
    LARGE AMOUNTS COULD CAUSE SERIOUS INJURY. CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED I/A/W SAFE
    HANDLING & USE INFORMATION.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. GET MEDICAL HELP FOR ANY BREATHING
    DIFFICULTY. EYE:FLUSH THOROUGHLY W/WATER FOR AT LEAST 15 MINUTES.
    CALL MD. SKIN:WASH W/SOAP & WATER. INGEST:DRINK 1-2 GLASSES OF
    WATER TO  DILUTE. DO NOT INDUCE VOMITING. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:>250F,>121C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO
    EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLUSH W/WATER. ABSORB W/SAWDUST OR RAGS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS. AVOID
    CONTACT W/EYES & PROLONGED CONTACT W/SKIN OR BREATHING OF SPRAY
    MIST OR SANDING DUST.
Other Precautions:CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF
    CHILDREN. DO NOT TAKE INTERNALLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR SPECIFIED FOR
    PROTECTION AGAINST PAINT SPRAY MIST & SANDING DUST IN RESTRICTED OR
    CONFINED AREAS.
Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV & LEL.
    MECHANICAL EXHAUST MAY BE REQUIRED IN CONFINED AREAS.
Protective Gloves:WATERPROOF GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN.
Work Hygienic Practices:REMOVE & WASH CLOTHING BEFORE REUSE. WASH HANDS
    BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
% VOLAT:72.4-72.6.

==================  Physical/Chemical Properties  ==================

Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.02-1.03
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:SUPDAT

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE &
    CARBON MONOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE W/LOCAL,
    STATE & FEDERAL REGULATIONS. DO NOT INCINERATE SEALED CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.