BELZONA  INC. -- BELZONA 1111 (SUPER METAL) BASE  -- 8030-00-187-7747
<pre>=====================  Product Identification  =====================

Product ID:BELZONA 1111 (SUPER METAL) BASE
MSDS Date:07/30/1996
FSC:8030
NIIN:00-187-7747
Status Code:A
=== Responsible Party ===
Company Name:BELZONA  INC.
Address:2000 N. W. 88 COURT
City:MIAMI
State:FL
ZIP:33172
Country:US
Info Phone Num:305-594-4994
Emergency Phone Num:800-424-9300
Preparer's Name:ERNEST CARTER
Chemtrec Ind/Phone:(800)424-9300
CAGE:0PX05
=== Contractor Identification ===
Company Name:BELZONA  INC.
Address:2000 N. W. 88 COURT
Box:City:MIAMI
State:FL
ZIP:33172
Country:US
Phone:305-594-4994
CAGE:0PX05

=============  Composition/Information on Ingredients  =============

Ingred Name:DGEBA-EPOXY RESIN
CAS:25068-38-6
Code:F
RTECS #:CE6880000
Minumum % Wt:10.
Maxumum % Wt:30.

Ingred Name:DGEBF-EPOXY RESIN
CAS:28064-14-4
Code:F
Minumum % Wt:10.
Maxumum % Wt:30.

Ingred Name:MODIFIED SILICA
CAS:67762-90-7
Code:F
Minumum % Wt:1.
Maxumum % Wt:5.

Ingred Name:TALC
CAS:14807-96-6
RTECS #:WW2710000
Minumum % Wt:1.
Maxumum % Wt:5.
OSHA PEL:SEE TABLE Z-3
ACGIH TLV:2 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE
Health Hazards Acute and Chronic:SKIN CONTACT, SKIN ABSORPTION, EYE
    CONTACT. SKIN SENSITIZER AND SKIN IRRTATION.
Effects of Overexposure:SKIN AND EYE IRRITATION. IRRITATION,
    SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN AND EYE CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:INHALATION: IF SYMPTOMS ARE EXPERIENCED. REMOVE SOURCE OF
    CONTAMINATION AND/OR MOVE VICTIM TO FRESH AIR.IF RECOVERY IS
    DELAYED OR THERE ARE SIGNS OF DISTRESS OBTAIN MEDICAL ATTENTION
    IMMEDIATELY.EYE C ONTACT: FLUSH EYES WITH WATER FOR 15 MINUTES.
    SEEK MEDICAL ADVICE IF ANY IRRITATION PERSISTS.SKIN CONTACT:
    IMMEDIATELY REMOVE EXCESS  WITH A CLEAN CLOTH AND WASH SKIN
    THOROUGHLY WITH SOAP AND WATER. I NGESTION: IF SWALLOWED, DO NOT
    INDUCE VOMITING. RINSE MOUTH WITH WATER AND DRINK PLENTY OF WATER.
    CALL TAMPA BAY REGIONAL POISON CENTER AT 1-800-282-3171 AND/OR SEEK
    MEDICAL ADVICE.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:=110.C, 230.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:WATER FOG (NOT A DIRECT STREAM OF WATER), FOAM,
    CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR PROTECTIVE CLOTHING AND USE
    SELF-CONTAINED BREATHING APPARATUS. FULL BUNKER GEAR SHOULD BE WORN
    IN EXTREME CASES. USE SAND TO CONTAIN BURNING MATERIAL.
Unusual Fire/Explosion Hazard:DECOMPOSITION AND COMBUSTION PRODUCTS MAY
    BE HAZARDOUS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB WITH AN INERT MATERIAL (E.G. EARTH OR
    SAND). SWEEP UP. PLACE INTO SUITABLE LABELED CONTAINERS. SEAL AND
    DISPOSE OF PROPERLY. FLUSH AREA WITH  DETERGENT AND WATER.
Neutralizing Agent:NONE

======================	Handling and Storage  ======================

Handling and Storage Precautions:HANDLING: AVOID CONTACT WITH SKIN AND
    EYES. OVERHEALING MAY CAUSE CONTAINERS TO RUPTURE. CONTAINERS
    SHOULD BE STORED UNDER COOL, DRY CONDITIONS. EMPTY CONTAINERS WILL
    RETAIN RESIDUE AND MAY BE DANGERO US. CHECK ALL CONTAINERS FOR
    LEAKS AT REGULAR INTERVALS AND BEFORE USE.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CONFINED AREAS OR WHERE GOOD
    NATURAL/MECHANICAL VENTILATION IS NOT AVAILABLE AN APPROPRIATE
    NIOSH OR MSHA APPROVED RESPIRATOR SHOULD BE WORN.
Ventilation:WHERE ADEQUATE NATURAL VENTILATION IS NOT AVAILABLE PROVIDE
    SUITABLE LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERMEABLE GLOVES, SUCH AS NEOPRENE, NITRILE OR PVC.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:WHERE THERE IS A RISK OF CONTAMINATION OF
    FOOTWEAR, SAFETY BOOTS SHOULD BE WORN AND CLEANED THOROUGHLY BEFORE
    REUSE.
Work Hygienic Practices:WHEN USING. DO NOT EAT, DRINK OR SMOKE. REMOVE
    CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. WASH HANDS WITH
    SOAP AND WATER AFTER HANDLING THIS PRODUCT.
Supplemental Safety and Health
WHERE MACHINING OR ABRADING OF CURED MATERIAL LEADS TO THE PRODUCTION
    OF RESPIRABLE AND/OR NUISANCE DUST, AN APPROPRIATE NIOSH OR MSHA
    APPROVED RESPIRATOR SHOULD BE WORN.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:NONE
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Spec Gravity:2.80
Solubility in Water:NEGLIGIBLE (<0.1%
Appearance and Odor:DARK GRAY PASTE WITH EPOXY/ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, BASES AND AMINES.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:GASEOUS COMBINATIONS OF CARBON,
    HYDROGEN  AND OXYGEN MAY OCCUR AT ELEVATED TEMPERATURES (200 C ).
Conditions to Avoid Polymerization:WILL NOT OCCUR WHEN STORED AND USED
    AS DIRECTED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.