ITW FLUID PRODUCTS GROUP -- 84906Q RED M-6 MARKER BASE 1 QT  -- 7510-00F036679
<pre>=====================  Product Identification  =====================

Product ID:84906Q RED M-6 MARKER BASE 1 QT
MSDS Date:03/31/1993
FSC:7510
NIIN:00F036679
=== Responsible Party ===
Company Name:ITW FLUID PRODUCTS GROUP
Address:8501 DELPORT DR
City:ST LOUIS
State:MO
ZIP:63114-5000
Country:US
Info Phone Num:800-443-9536
Emergency Phone Num:800-443-9536
CAGE:ITWFP
=== Contractor Identification ===
Company Name:ITW FLUID PRODUCTS GROUP
Address:8501 DELPORT DR
Box:City:ST LOUIS
State:MO
ZIP:63114-5000
Country:US
Phone:800-443-9536
CAGE:ITWFP

=============  Composition/Information on Ingredients  =============

Ingred Name:XYLENE, DIMETHYLBENZENE, XYLOL
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 51-70%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:PROPYLENEGLYCOL MONOMETHYL ETHER ACETATE,
    1-METHOXY-2-PROPANOL ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 11-30%

Ingred Name:VOL ORGANIC CMPD: COATING/MATERIAL-6.18 LB/GAL
RTECS #:9999999VO

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50(RAT): 4.3 G/KG XYLENE
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HIGH CONCENTRATIONS OF
    VAPORS MAY PRODUCE RESPIRATORY TRACT IRRITATION. SKIN: MODERATE
    IRRITATION/ABSORPTION. PROLONGED/REPEATED OVEREXPOSURE MAY LEAD TO
    SENSITIZATION/DERMATITIS. EYES: MO DERATE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
    VOMITING
Medical Cond Aggravated by Exposure:SKIN & RESPIRATORY DISORDERS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH WELL W/WATER. SKIN: WASH W/SOAP & WATER.
    INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT, GIVE
    OXYGEN. INGESTION: DON'T INDUCE VOMITING. IF VOMITING OCCURS, KEEP
    HEAD BELOW HIPS  TO PREVENT ASPIRATION OF LIQUID INTO LUNGS. OBTAIN
    MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:81F
Lower Limits:1.3
Upper Limits:13.1
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS IN
    CONFINED AREAS.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG
    GROUND/BE MOVED BY VENTILATION & BE IGNITIED BY IGNITION SOURCE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PREVENT SKIN & EYE CONTACT. USE
    NON-COMBUSTIBLE MATERIAL TO CONFINE &/ABSORB. ELIMINATE IGNITION
    SOURCES. VENTILATE AREA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION. MANY HOT
    ORGANIC CHEMICAL VAPORS/MISTS ARE SUSCEPTIBLE TO SUDDEN SPONTANEOUS
    COMBUSTION WHEN MIXED W/AIR.
Other Precautions:IGNITION MAY OCCUR AT TEMPS < THOSE PUBLISHED IN THE
    LITERATURE AS AUTOIGNITION/IGNITION TEMPS. ANY PROPOSED USE OF THIS
    PRODUCT IN ELEVATED-TEMP PROCESSES SHOULD BE THOROUGHLY EVALUATED
    TO ASSURE SAF E OPERATING CONDITIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED FOR NORMAL USE W/ADEQUATE
    VENTILATION. IN POORLY VENTILATED AREAS, USE NIOSH APPROVED ORGANIC
    VAPOR RESPIRATOR.
Ventilation:LOCAL EXHAUST FOR CONFINED AREAS. GENERAL MECHANICAL IS
    ADEQUATE FOR NORMAL USE.
Protective Gloves:POLYVINYL CHLORIDE-COATED
Eye Protection:SAFETY GLASSES/SPLASH PROOF GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT RUBBER GLOVES & OTHER
    PROTECTIVE GEAR, EYE BATH, SAFETY SHOWER
Supplemental Safety and Health
IGNITION OF ORGANIC CHEMICAL VAPORS MAY OCCUR AT TYPICAL ELEVATED-TEMP
    PROCESS CONDITIONS, ESPECIALLY IN PROCESSES OPERATING UNDER VACUUM
    IF SUBJECTED TO SUDDEN INGRESS OF AIR/OUTSIDE PROCESS EQUIPMEN T
    OPERATING UNDER ELEVATED PRESSURE IF SUDDEN ESCAPE OF VAPORS/MISTS
    TO THE ATMOSPHERE OCCURS.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:282-302F
Vapor Density:>1
Spec Gravity:0.91
Evaporation Rate &amp; Reference:(BU AC=1): >1
Solubility in Water:APPRECIABLE
Appearance and Odor:RED OPAQUE LOW VISCOSITY LIQUID W/SWEET SOLVENT
    ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME & OTHER IGNITION
    SOURCES.
Hazardous Decomposition Products:OXIDES OF CARBON

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS. UN1263. EMPTY CONTAINERS RETAIN RESIDUE & CAN
    BE DANGEROUS. DON'T
    PRESSURIZE/CUT/WELD/BRAZE/SOLDER/DRILL/GRIND/EXPOSE TO HEAT/STATIC
    ELEC TRICITY/SPARKS & OTHER IGNITION SOURCES.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.