DEFENSE TECHNOLOGY CORP OF AMERICA -- FIRST DEFENSE  -- 6850-01-474-0794
<pre>=====================  Product Identification  =====================

Product ID:FIRST DEFENSE
MSDS Date:09/15/1998
FSC:6850
NIIN:01-474-0794
=== Responsible Party ===
Company Name:DEFENSE TECHNOLOGY CORP OF AMERICA
Address:1900 N LOOP RD
Box:240
City:CASPER
State:WY
ZIP:82602-0240
Country:US
Info Phone Num:800-733-3832
Emergency Phone Num:800-733-3832
Chemtrec Ind/Phone:(800)424-9300
CAGE:04WZ5
=== Contractor Identification ===
Company Name:DEFENSE TECHNOLOGY CORP OF AMERICA
Address:1900 N LOOP RD
Box:240
City:CASPER
State:WY
ZIP:82602-0240
Country:US
Phone:800-733-3832
CAGE:04WZ5
Company Name:FEDERAL AND COMMERCIAL SALES INC
Address:2313 DISTRIBUTION CIR
Box:City:SILVER SPRING
State:MD
ZIP:20910
Country:US
Phone:301-588-6100
Contract Num:SP0450-00-M-SH73
CAGE:1JXZ3
Company Name:FEDERAL AND COMMERCIAL SALES INC
Address:2313 DISTRIBUTION CIR
Box:City:SILVER SPRING
State:MD
ZIP:20910
Country:US
Phone:301-588-6100
Contract Num:SP0450-00-M-SK12
CAGE:1JXZ3

=============  Composition/Information on Ingredients  =============

Ingred Name:CAPSAICINOIDS (CAS# 404-88-4)
= Wt:.18

Ingred Name:PROPYLENE GLYCOL USP
CAS:57-55-6
RTECS #:TY2000000
= Wt:13.

Ingred Name:SPECIALTY DENATURED ALCOHOL (SDA) 408
CAS:64-17-5
RTECS #:KQ6300000
= Wt:28.
OSHA PEL:1900 MG/M3;1000 PPM
ACGIH TLV:1880 MG/M3;1000 PPM

Ingred Name:DISTILLED H2O
CAS:7732-18-5
RTECS #:ZC0110000
= Wt:58.

Ingred Name:NITROGEN IS THE EXCLUSIVE PROPELLANT
CAS:7727-37-9
RTECS #:QW9700000

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: N/A.  CHRONIC: N/A.
Effects of Overexposure:INGREDIENTS CAUSE IRRITATION THROUGH ALL ROUTES
    OF ENTRY. REPEATED CONTACT MAY CAUSE DERMATITIS. INGESTION MAY
    CAUSE NAUSEA, VOMITING, AND/OR DIARRHEA.
Medical Cond Aggravated by Exposure:MAY CAUSE MORE SEVERE, TEMPORARY,
    EFFECTS ON THOSE PERSONS WHO ARE ASTHMATICS OR SUFFER FROM
    EMPHYSEMA.

=======================  First Aid Measures  =======================

First Aid:PROVIDE FRESH AIR. IRRIGATE WITH COPI0US AMOUNTS OF COOL
    WATER. OBTAIN MEDICAL ADVICE IF SYMPTOMS PERSIST. INHALATION:
    PROVIDE FRESH AIR. EYES: IRRIGATE WITH COOL WATER AT LEAST 15
    MINUTES, OR UNTIL R ELIEVED. SKIN: FLUSH WITH COOL WATER. WASH WITH
    MILD SOAP & WATER. INGESTION: RINSE MOUTH WITH WATER. INGEST MILK,
    OR WATER. OBTAIN MEDICAL ADVICE IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:>104.4C, 220.F
SW846-1010
Autoignition Temp:>104.4C, 220.F
Extinguishing Media:WATER, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:WEAR RESPIRATOR OR SELF CONTAINED BREATHING
    APPARATUS TO AVOID IRRITATION.
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP SMALL SPILLS WITH ABSORBENT. WITH
    LARGE SPILLS, USE RESPIRATORY EQUIPMENT TO AVOID IRRITATION, AND
    COLLECT WITH AN ABSORBENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA. AVOID
    DIRECT LIGHT & HEAT. DO NOT EXPOSE TO TEMPERATURES OVER 120 DEG F.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE.
Ventilation:LOCAL EXHAUST.
Eye Protection:SEE SUPPLEMENTAL DATA.
Other Protective Equipment:NOT REQUIRED.
Work Hygienic Practices:NORMAL.
Supplemental Safety and Health
EYE PROTECTION: TO BE UTILIZED IN A MANUFACTURING ENVIRONMENT IN &
    AROUND MACHINERY. MINIMAL EXPOSURE WITHOUT PROTECTIVE EYEWEAR IN AN
    OFFICER TRAINING ENVIRONMENT ARE ACCEPTABLE.

==================  Physical/Chemical Properties  ==================

HCC:V5
Boiling Pt:>104.4C, 220.F
Spec Gravity:0.955 (H20=1)
Solubility in Water:SOLUBLE
Appearance and Odor:CREAMY, PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Conditions to Avoid Polymerization:WILL NOT OCCUR

=====================  Ecological Information  =====================

Ecological:THERE ARE NO HCFC'S OR CFC'S.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT FEDERAL, STATE, & LOCAL REGULATIONS. 
    EVACUATE CONTENTS IN A SAFE AREA, & DISPOSE OF CONTAINER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.